This product is based on the dog conditioned reflex based on the development of products, dog training and only bark has a good effect!
product description:
First, the function: vibration + electric shock + warning sound + LED flashlight
Second, the power supply mode: remote control using 6V battery, the receiver uses the 7th battery, the battery can be purchased in general supermarkets.
Third, before use, please install the remote control battery, and then install the receiver battery, in order to facilitate the automatic matching of the two signals.
Fourth, the remote control to use:
1, LED digital display function: easy to operate, display sound, vibration, light, electric shock signal function symbols.
2, 0–100 range can be adjusted pulse electric shock strength and shock intensity, the use of different intensity training pets, there are weak to strong choice.
3, the remote control has power-saving features, in the case of not using, 15 seconds or so automatically enter the shutdown state.
4, in a variety of interference and hinder the environment, remote control distance of about 300 meters.
5, a remote control can control two receivers at the same time, press 1/2 button to switch, select 1 control the first one, select 2 to control the other one, press the Mode button in the sound, vibration, Press the number plus or minus key to adjust the stalls, Y button to issue instructions.
6, this model does not remember the dog training function, each time remove the battery or replace the remote control battery, the receiver battery must be re-installed in order to re-pair, to normal use, otherwise the remote control may not be remote control receiver.
7, with LED flashlight function, in the dark or poor light conditions.
8, the remote control on the back button, you can carry, hanging on the waist bag.
9, red remote control indicator, the red light when charging or press the Y button will light.
Receiver Usage:
1, open the lid into the battery after the correct start at the same time, will issue a drop of sound.
2, the receiver has an active ring, under normal circumstances, the dog is still, the receiver in about 15 seconds will automatically power-off protection, that is, enable power-saving mode, the dog activity, the receiver ring The chip will follow, and the receiver will start.
With two diodes and four metal cap, the diode can visually test the strength of the shock, the two ends of the diode and the receiver screw can be in contact with the metal cap can be used in the receiver to increase the length of effective contact with the dog skin.
Precautions:
1, the product does not have a waterproof function, must not be soaked in water, rain, or dog water, remember to take the receiver off to prevent water.
2, the battery power shortage will affect the use of results, please replace.
3, the dog has just begun to bring the receiver may not be used to prevent the dog to bite on the receiver damage.
product description:
First, the function: vibration + electric shock + warning sound + LED flashlight
Second, the power supply mode: remote control using 6V battery, the receiver uses the 7th battery, the battery can be purchased in general supermarkets.
Third, before use, please install the remote control battery, and then install the receiver battery, in order to facilitate the automatic matching of the two signals.
Fourth, the remote control to use:
1, LED digital display function: easy to operate, display sound, vibration, light, electric shock signal function symbols.
2, 0–100 range can be adjusted pulse electric shock strength and shock intensity, the use of different intensity training pets, there are weak to strong choice.
3, the remote control has power-saving features, in the case of not using, 15 seconds or so automatically enter the shutdown state.
4, in a variety of interference and hinder the environment, remote control distance of about 300 meters.
5, a remote control can control two receivers at the same time, press 1/2 button to switch, select 1 control the first one, select 2 to control the other one, press the Mode button in the sound, vibration, Press the number plus or minus key to adjust the stalls, Y button to issue instructions.
6, this model does not remember the dog training function, each time remove the battery or replace the remote control battery, the receiver battery must be re-installed in order to re-pair, to normal use, otherwise the remote control may not be remote control receiver.
7, with LED flashlight function, in the dark or poor light conditions.
8, the remote control on the back button, you can carry, hanging on the waist bag.
9, red remote control indicator, the red light when charging or press the Y button will light.
Receiver Usage:
1, open the lid into the battery after the correct start at the same time, will issue a drop of sound.
2, the receiver has an active ring, under normal circumstances, the dog is still, the receiver in about 15 seconds will automatically power-off protection, that is, enable power-saving mode, the dog activity, the receiver ring The chip will follow, and the receiver will start.
With two diodes and four metal cap, the diode can visually test the strength of the shock, the two ends of the diode and the receiver screw can be in contact with the metal cap can be used in the receiver to increase the length of effective contact with the dog skin.
Precautions:
1, the product does not have a waterproof function, must not be soaked in water, rain, or dog water, remember to take the receiver off to prevent water.
2, the battery power shortage will affect the use of results, please replace.
3, the dog has just begun to bring the receiver may not be used to prevent the dog to bite on the receiver damage.
Tips:
1. To adapt to this remote dog collar or electronic collar, let the dog wearing a collar do usually like to do and not to direct training, you want to carry the transmitter even without training. This will help the dog to accept the collar or the transmitter will not be stimulated
2. As long-range collar or electronic collar stimulation is not directional, so use long rope or traction and to be far away from people and other animals, this can help your dog to learn faster, do not do not fully Do not use long ropes or traction before training.
3. In general, try to use the smallest stimulus for your dog. When you choose the correct stimulus, select 1 stall. If your dog does not respond (shaking, grasping the collar, swinging the ears, etc.), then To file up to the appropriate stalls, when the dog because of the stimulus sounds or panic, is to stimulate the stalls too high.
4. Never use such products, used to correct or eliminate any aggressive or biting behavior, if the dog shows such aggressive behavior, you can contact the area where a professional trainer.
5. When your dog starts to understand the behavior of the product can not use the time, and strengthen training is not accepted, if the dog muddleheaded, it is necessary to bring it on the traction and praise it, when the command needs to be amended , The key is that you do not take emotional at this time, and then immediately recognize and reward the dog to make the right decision.
6. Training at a new venue will cause the dog to become distracted, causing you to use the product to strengthen the command, your collar stimulus file may need to go up or down, according to exercise or distraction Level, in order to help the dog in the new environment to execute the command with the traction and long rope is very important, the training should be correct, short, each time about 10 to 15 minutes, let your dog to focus attention on you Body.
Training, only called recommendations
1. The remote control and receiver to match, to ensure that the remote control can remote control receiver
2. Every time the first sound (warning tone) several times to remind the dog, be sure to let the dog is doing continuous action is not allowed.
3. Appropriate can use low-frequency vibration, and then high-frequency vibration (do the best preparation for snacks action incentives).
4. Occasionally use the electric shock, the first low-intensity, the effect of not to increase.
5. The use of electric shock function, the two electric shock column must contact the dog skin, hair and more dogs, while tightening the pillow to check the surrounding electric shock, hand clawed hair, to ensure that two electric shock column contact with the skin at the same time . To electricity to him, hair is not conductive, not high-voltage, not the emptying, and special reminders
1. To adapt to this remote dog collar or electronic collar, let the dog wearing a collar do usually like to do and not to direct training, you want to carry the transmitter even without training. This will help the dog to accept the collar or the transmitter will not be stimulated
2. As long-range collar or electronic collar stimulation is not directional, so use long rope or traction and to be far away from people and other animals, this can help your dog to learn faster, do not do not fully Do not use long ropes or traction before training.
3. In general, try to use the smallest stimulus for your dog. When you choose the correct stimulus, select 1 stall. If your dog does not respond (shaking, grasping the collar, swinging the ears, etc.), then To file up to the appropriate stalls, when the dog because of the stimulus sounds or panic, is to stimulate the stalls too high.
4. Never use such products, used to correct or eliminate any aggressive or biting behavior, if the dog shows such aggressive behavior, you can contact the area where a professional trainer.
5. When your dog starts to understand the behavior of the product can not use the time, and strengthen training is not accepted, if the dog muddleheaded, it is necessary to bring it on the traction and praise it, when the command needs to be amended , The key is that you do not take emotional at this time, and then immediately recognize and reward the dog to make the right decision.
6. Training at a new venue will cause the dog to become distracted, causing you to use the product to strengthen the command, your collar stimulus file may need to go up or down, according to exercise or distraction Level, in order to help the dog in the new environment to execute the command with the traction and long rope is very important, the training should be correct, short, each time about 10 to 15 minutes, let your dog to focus attention on you Body.
Training, only called recommendations
1. The remote control and receiver to match, to ensure that the remote control can remote control receiver
2. Every time the first sound (warning tone) several times to remind the dog, be sure to let the dog is doing continuous action is not allowed.
3. Appropriate can use low-frequency vibration, and then high-frequency vibration (do the best preparation for snacks action incentives).
4. Occasionally use the electric shock, the first low-intensity, the effect of not to increase.
5. The use of electric shock function, the two electric shock column must contact the dog skin, hair and more dogs, while tightening the pillow to check the surrounding electric shock, hand clawed hair, to ensure that two electric shock column contact with the skin at the same time . To electricity to him, hair is not conductive, not high-voltage, not the emptying, and special reminders
Comments
Post a Comment